The process of finding the forklift load center is simple. Please check the information on the forklift nameplate. It will tell you: 1. Distance from the load center 2. Vertical mast 3. Tilt to the right 4. Altitude When you stack loads evenly, such as pallets, the load center will be in the middle of the load. So, for a 1000 mm load, the load center will be 500 mm. Based on the information on the...
Hifoune equipment maintenance personnel go to European agent companies to carry out equipment maintenance and inspection work.
The six major risks of charging forklift batteries: Mobile forklift batteries are very dangerous because lead-acid power batteries are very heavy. Usually, without some type of mechanical assistance, it is impossible to move or lift it into the charging station. Any device used to move batteries should be easy to move without the need for manual lifting or exaggerated body movements. Carefully che...
1、Before driving the forklift truck, you should lift up the tines and leave the ground by 30cm. 2. Pay attention to the road conditions and the surrounding environment while driving. 3、Forklift trucks are not allowed to work when forking heavy objects; when the centre of gravity deviates, quit and start again until the centre of gravity is suitable. 4、After forklift forks up heavy objects, the tin...
In winter, diesel forklift is not good to start, what is the way? One way to help you start quickly is to use cold starting fluid. The composition of the cold starting liquid is a compound with a low ignition point, mainly ether, which has a low flash point and is volatile, making the engine start smoothly at a low temperature. Because the starting fluid has the characteristics of volatile and low...