How to choose forklift accessories?

1. Check whether the part number and specifications of the forklift accessories are appropriate: Most forklift accessories have a part number and technical parameters. For example, when purchasing electrical system accessories, you should pay attention to check whether the voltage and power of the replaced parts are consistent; when purchasing forklift engine transmission belts, you should pay attention to the model, length and width.

2. Check whether the trademark logo on the outer packaging is complete: the quality of the outer packaging of excellent forklift accessories is relatively good, and the writing on the box is clear and the overprinting color is bright. Some important components, such as generators, starters, hydraulic pumps, etc., are also equipped with instruction manuals, certificates and inspector stamps to guide users in the correct use of maintenance methods. Therefore, you should be careful when purchasing to avoid buying fake and inferior forklift parts.

3. Check whether the shape and size of forklift accessories are deformed: Some forklift accessories are prone to deformation due to improper manufacturing, logistics, transportation, and storage. During inspection, you can roll the shaft part along the glass plate to see if there is light leakage at the joint between the part and the glass plate to determine whether it is bent; when purchasing a forklift clutch driven plate steel plate or a forklift friction plate, you can , hold the friction plate in front of your eyes and observe whether it is warped; when purchasing seals such as forklift oil seals, the end face of the oil seal with a skeleton should be a perfect circle and can fit the flat glass without warping; the outer edge of the oil seal without a skeleton should be straight , hold it with your hands to deform it, and it should return to its original shape after you let go. When purchasing various types of gaskets, you should also pay attention to using professional measuring tools to check the geometric size and shape of the accessories.

4. Check whether the joint parts of forklift parts are flat: During the transportation and storage process of forklift parts, or due to vibration and bumps, burrs, indentations, damage or cracks will often occur in the joint parts, which will affect the installation and use of forklift parts. This should be checked when purchasing or inspecting the goods.

5. Check whether there is any rust on the surface of forklift parts: The surface of qualified parts has both a certain degree of precision and a bright finish. The more important the parts, the higher the precision, and the stricter the packaging against rust and corrosion. Pay attention to the inspection when purchasing or inspecting the goods. If you find that the accessories have rust spots, mildew spots, cracks in the rubber parts, loss of elasticity, or obvious turning tool lines on the journal surface, they should be replaced.

6. Check whether the rotating parts are flexible: When purchasing rotating parts assemblies such as forklift oil pumps, turn the pump shaft by hand, and it should feel flexible and free of stagnation; when purchasing needle roller bearings, support the inner ring of the bearing with one hand and use the other hand to Turn the outer ring. The outer ring should rotate quickly and freely, and then gradually stop rotating. If the rotating parts do not rotate smoothly, it means that the interior is corroded or the appearance has been deformed, which will affect the use and should be returned or exchanged.